1P1G3157QDBVRQ1

5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 1G3157 6 Pins 2.3V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-1P1G3157QDBVRQ1
Package: SOT-23-6
Datasheet: -
Stock: 615
Description: 5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 1G3157 6 Pins 2.3V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	15Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Terminal Pitch	0.95mm
Base Part Number	1G3157
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	10μA
Number of Bits	2
Propagation Delay	300 ps
Turn On Delay Time	24 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	15Ohm
High Level Output Current	128mA
Low Level Output Current	128mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Channel Capacitance (CS(off), CD(off))	5.2pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	5.7ns, 3.8ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-54dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	15Ohm
Normal Position	NC
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

1P1G3157QDBVRQ1 Overview

This electronic part is conveniently packaged in SOT-23-6, making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~125°C TA. There are 6 terminations totally. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.3V voltage supply. Electronic part bodies are injected with 6 pins. A SPDT switching circuit is used for these analog switches. Look for analog switch ic variants by searching with 1G3157. It has an internal resistance of 15Ohm. The datasheets for the 6 pins explain the functions. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. In order to operate this switch device, it would need a current of 1μA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A voltage higher than 10μA may cause damage to the switch multiplexer. There are 1 inputs to be operated. 300MHz bandwidths enable data to be transferred. Resistivity from Drain to Source is 15Ohm for this electronic part. 2 outputs are included in the analogue multiplexer. It is capable of carrying out 2-bit operation. The series starts with Automotive, AEC-Q100.