1P1G3157QDCKRQ1

5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 1G3157 6 Pins 2.3V 6-TSSOP, SC-88, SOT-363

Manufacturer: Texas Instruments
Nocochips NO: 815-1P1G3157QDCKRQ1
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: -
Stock: 583
Description: 5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 1G3157 6 Pins 2.3V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Cut Tape (CT)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	15Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Base Part Number	1G3157
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	10μA
Number of Bits	2
Propagation Delay	300 ps
Turn On Delay Time	24 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	15Ohm
High Level Output Current	128mA
Low Level Output Current	128mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Channel Capacitance (CS(off), CD(off))	5.2pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	5.7ns, 3.8ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-54dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	15Ohm
Normal Position	NC
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

1P1G3157QDCKRQ1 Overview

As the electronic part is packed in 6-TSSOP, SC-88, SOT-363, international shipping is convenient. Advanced packaging method Cut Tape (CT) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 2.3V voltage supply. An electrical component like this is included in the 6 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Use 1G3157 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 15Ohm. For details about the functions of 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. This digital switch can be operated with a current of 1μA. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 10μA, damage can occur. In order to operate the 1 inputs, there are several steps to follow. There are various bandwidths available for data transfer. Drain to Source resistance for this electronic component is 15Ohm. The analog switch ics includes 2 outputs. 2-bit conductivity is possible. The Automotive, AEC-Q100 series includes it.