2.5SLG150M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2917 (7343 Metric) |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | PC-CON, SLG |
| Size / Dimension | 0.287Lx0.169W 7.30mmx4.30mm |
| Tolerance | ±20% |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Type | Polymer |
| Applications | General Purpose |
| Voltage - Rated | 2.5V |
| Capacitance | 150μF |
| Packing Method | TR, 13 Inch |
| Case Code (Metric) | 7343 |
| Case Code (Imperial) | 2917 |
| ESR (Equivalent Series Resistance) | 9mOhm |
| Polarity | POLARIZED |
| Rated (DC) Voltage (URdc) | 2.5V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 2.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 2.7A @ 100kHz |
| Height Seated (Max) | 0.043 1.10mm |
| Length | 7.3mm |
| Width | 4.3mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of 2917 (7343 Metric). This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PC-CON, SLG series. This part is mounted in the way of Surface Mount. The type of the 2.5SLG150M capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Rubycon 2.5SLG150M is suitable to conduct the ripple current at 2.7A. 2.5SLG150M Capacitor is mounted by Surface Mount. There are 2 terminals embeded in 2.5SLG150M Capacitor. Voltage - Rated often has values of 2.5V. The part is packaged by TR, 13 Inch. The 2917 refer to case code (imperial). Case Code (Metric) includes 7343.
PC-CON, SLG Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: 2917 (7343 Metric)
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 2.5SLG150M Aluminum Polymer Capacitors.
Typically, 2.5SLG150M is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- Coupling or blocking
- Power Factor Correction
- Power Line Buffering
- Motor Start
- Server motherboards
- DC Link
- Voltage Doubling
- Frequency Converters
- Signal decoupling & power bypass
