200AWMSP3T2A1M6RE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole, Right Angle |
| Insulation Material | GLASS FILLED NYLON |
| Housing Material | GLASS FILLED NYLON |
| Actuator Material | Brass, Chrome Plated |
| Center Contact Material | COPPER ALLOY |
| Terminal Material | COPPER ALLOY |
| End Contact Material | COPPER ALLOY |
| Operating Temperature | -30°C~85°C |
| Packaging | Bulk |
| Published | 2001 |
| Series | 200A |
| Feature | Epoxy Sealed Terminals |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Voltage - Rated DC | 20V |
| Current Rating (Amps) | 0.4VA AC/DC |
| Orientation | Right Angle |
| Ingress Protection | IP67 - Dust Tight, Waterproof |
| Current Rating | 400mA |
| Termination Style | PC Pin |
| Voltage - Rated AC | 20V |
| Body Length or Diameter | 8.128mm |
| Body Breadth | 5.08 mm |
| Actuator Type | Standard Round |
| Circuit | SPDT |
| Switch Function | On-Off-On |
| Contact Resistance | 0.02mOhm |
| Insulation Resistance | 1000000000Ohm |
| Dielectric Withstanding Voltage | 1000VRMS V |
| Electrical Life | 50,000 Cycles |
| Illumination | Non-Illuminated |
| Switch Type | TOGGLE SWITCH |
| Illumination Type | Illuminated, Non-Illuminated |
| Bushing Thread | Unthreaded |
| PCB Hole Count | 5 |
| Bushing Length | 0.177 inch |
| Contact (AC) Max Power Rating R Load | 0.4VA@20VAC |
| Body Height | 8.89mm |
| Length - Termination | 0.13 inch |
| Actuator Length | 6.10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Ratings | Dust Tight, IP67, Waterproof |
See Relate Datesheet
