20310200102
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Panel, Screw |
| Mounting Type | Panel Mount |
| Package / Case | Module, Single Pass Through |
| Operating Temperature | -40°C~85°C |
| Packaging | Bulk |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 12V~15V |
| Current Rating | 200A |
| Frequency | 100kHz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Operating Supply Voltage | 15V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 20mA |
| Accuracy | ±0.8% |
| Response Time | 1μs |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | ±0.1% |
| Sensing Method | Hall Effect |
| Max Supply Voltage (DC) | 15V |
| Min Supply Voltage (DC) | 12V |
| For Measuring | AC/DC |
| Current - Sensing | 200A |
| Height | 56.3mm |
| Length | 66mm |
| Width | 56.5mm |
| REACH SVHC | No SVHC |
20310200102 Overview
Module, Single Pass Through packages are used for the safety protection of current sensors. The current sensors are enclosed in the Bulk to prevent them from being damaged. These current sensors should be able to deliver a maximum current of 20mA. It is recommended that current sensors do not supply a current greater than 20mA. To ensure proper operation of these current sensors, the operating temperature cannot be below -40°C. It is recommended that the maximum operating temperature of the current sensors is set to 85°C. Current sensors have been designed to measure current at 200A. It is possible for the current sensors to supply 15V voltage when they are operating. In a DC circuit, these sensors must provide voltages greater than 12V. In the DC circuit, the voltage supplied by the current sensors should not exceed 15V.
20310200102 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Panel Mount
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: 12V~15V
Frequency: 100kHz
Sensing Current: 200A
Module, Single Pass Through Package
20310200102 Applications
There are a lot of HARTING 20310200102 Current Sensors applications.
- Battery chargers and systems
- Switched Mode Power Supplies (SMPS)
- OEM Current Sensing
- Inverter and H-bridge current measurements
- Home Automation
- Industrial Monitoring and Control Systems
- Monitor Motor Operation
- Proving Switch
- Electrical drives
- Motor and load control
