20312000101
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Panel |
| Mounting Type | Panel Mount |
| Package / Case | Module, Single Pass Through |
| Weight | 1.000001g |
| Operating Temperature | -40°C~85°C |
| Packaging | Bulk |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 15V~24V |
| Current Rating | 2kA |
| Frequency | 100kHz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 33mA |
| Operating Supply Voltage | 24V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 33mA |
| Accuracy | ±0.3% |
| Response Time | 1μs |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | ±0.1% |
| For Measuring | AC/DC |
| Current - Sensing | 2000A |
| Height | 135mm |
| Length | 170mm |
| Width | 52mm |
| RoHS Status | ROHS3 Compliant |
20312000101 Overview
For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. Current sensors are packaged in the Bulk for protection. The maximum current supplied by these current sensors should be 33mA. If the current supplied by the current sensor is greater than 33mA, then the sensor should be faulty. To ensure proper operation of these current sensors, the operating temperature cannot be below -40°C. It is recommended, however, to set the maximum operating temperature for the current sensors to 85°C. The current for which the current sensors have been designed is 2kA. The current sensors could supply 24V voltage when they operate.
20312000101 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Panel Mount
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: 15V~24V
Frequency: 100kHz
Sensing Current: 2000A
Module, Single Pass Through Package
20312000101 Applications
There are a lot of HARTING 20312000101 Current Sensors applications.
- Battery chargers and systems
- Battery supplied applications
- DC motor drives
- AC variabel speed drives and servo motor drives
- Power Supplies for welding applications
- Motor and load control
- Electrical drives
- Switched Mode Power Supplies(SMPS)
- Inverter and H-bridge current measurements
- Power supply management
