20SEP56M+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Series | OS-CON™, SEP |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 20V |
| Capacitance | 56μF |
| Voltage - Rated DC | 20V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 40mOhm |
| Lead Spacing | 0.197 5.00mm |
| Lead Diameter | 500 μm |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 224μA |
| Ripple Current | 2.4A |
| Life (Hours) | 3000 hours |
| Ripple Current @ Low Frequency | 120mA @ 120Hz |
| Ripple Current @ High Frequency | 2.4A @ 100kHz |
| Dissipation Factor | 12 % |
| Diameter | 10mm |
| Height Seated (Max) | 0.315 8.00mm |
| Length | 8mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 56μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 20SEP56M+T capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 20SEP56M+T is suitable to conduct the ripple current at 2.4A. 20SEP56M+T Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 20V. 20SEP56M+T Capacitor. There are 224μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. Voltage - Rated often has values of 20V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
OS-CON™, SEP Series
Capacitance: 56μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 20SEP56M+T Aluminum Polymer Capacitors.
Typically, 20SEP56M+T is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Voltage Doubling
- Smoothing Noise Filtering
- Spot Welding
- Computer motherboards
- Flashtube Ignition
- To enhance power efficiency
- Bypassing Noise Filtering
- Audio Crossover
- Signal decoupling & power bypass
- DC Link
