227ULR016MEH
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (WET) |
| Packaging | Bulk |
| Tolerance | 20% |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 16V |
| Capacitance | 220μF |
| Lead Pitch | 2.4892mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 750mOhm |
| Polarity | Polar |
| Ripple Current | 3.1A |
| Life (Hours) | 2000 hours |
| Height Seated (Max) | 12.4968mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 220μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 227ULR016MEH capacitor Illinois Capacitor 227ULR016MEH is suitable to conduct the ripple current at 3.1A. 227ULR016MEH Capacitor is mounted by Through Hole. There are 2 terminals embeded in 227ULR016MEH Capacitor. Voltage - Rated often has values of 16V. The dielectric materials are defined as ALUMINUM (WET). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 220μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of 227ULR016MEH Aluminum Polymer Capacitors.
Typically, 227ULR016MEH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Decoupling Noise Filtering
- Computer motherboards
- Lighting Ballast
- Spot Welding
- Bypassing Noise Filtering
- Signal decoupling & power bypass
- Motor Control
- UPS Buffering
- Power Factor Correction
