Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Clock Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Nominal Supply Current |
45mA |
Frequency (Max) |
133.3MHz |
Family |
2308 |
Output Characteristics |
3-STATE |
Input |
LVTTL |
Logic IC Type |
PLL BASED CLOCK DRIVER |
Max I(ol) |
0.008 A |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Number of True Outputs |
8 |
Length |
9.9mm |
Width |
3.9mm |
Thickness |
1.5mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Packaging |
Tape and Reel |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
2308-2DCGI8 Overview
A clock integrated circuit is packaged in a Tape and Reel-shaped package because it is for use as a clock. As part of the SOIC package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. There are 16 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by LVTTL as its input. To access the electronic component's full performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 133.3MHz is available. Microprocessor-specific clock PLL with 16 bits. Clock generator is designed with 16 pins. In addition to having an impressive low-temperature performance, this clock device can perform -40°C operations simultaneously. At a temperature of 85°C, the clock generator ic can operate with attenuated performance. Time clock generator can handle a voltage of 3.3V as the supply voltage. A Clock Drivers clock generator is essentially what this device is. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max. The clock generator is configured with 8 pins for enabling true outputs. By searching for parts that belong to the 2308 family, you can find electronic parts that are similar. A voltage of more than 3.6V will not be suitable for powering this clock generator. Clock PLL operates with the minimal supply voltage of 3V. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER.
2308-2DCGI8 Features
Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
2308-2DCGI8 Applications
There are a lot of Integrated Device Technology (IDT) 2308-2DCGI8 Clock Generators applications.
- Televisions
- Bit synchronization
- Bluetooth transmitters
- GPS systems
- Phase modulation cellular systems
- Main oscillator in receiver
- Simple clock clean-up circuits
- PCI express cards
- Radar
- Melting