25SEPF180M+TSS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Number of Pins | 12 |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| Series | OS-CON™, SEPF |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 180μF |
| Voltage - Rated DC | 25V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 16mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 25V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 900μA |
| Ripple Current | 4.65A |
| Life (Hours) | 5000 hours |
| Ripple Current @ Low Frequency | 232.5mA @ 120Hz |
| Ripple Current @ High Frequency | 4.65A @ 100kHz |
| Dissipation Factor | 12 % |
| Diameter | 8mm |
| Height Seated (Max) | 0.472 12.00mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 180μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEPF series. This part is mounted in the way of Through Hole. The type of the 25SEPF180M+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 25SEPF180M+TSS is suitable to conduct the ripple current at 4.65A. 25SEPF180M+TSS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in 25SEPF180M+TSS Capacitor. There are 900μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 25V volts. The dielectric materials are defined as ALUMINUM. There are 12 pins available in the part.
OS-CON™, SEPF Series
Capacitance: 180μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 25SEPF180M+TSS Aluminum Polymer Capacitors.
Typically, 25SEPF180M+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Lighting Ballast
- Power Factor Correction
- Computer motherboards
- Server motherboards
- Voltage Doubling
- Signal decoupling & power bypass
- Frequency Converters
- Motor Start
- PFC
- Motor Control
