2ED020I06FIXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width), 18 Leads |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 14V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Max Output Current | 2A |
| Output Current | 2A |
| Propagation Delay | 120 ns |
| Input Type | Inverting |
| Turn On Delay Time | 115 ns |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 500 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 2A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 40000 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 650V |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2ED020I06FIXUMA1 Overview
In order to increase flexibility, the package 20-SOIC (0.295, 7.50mm Width), 18 Leads is used.A package of Tape & Reel (TR) has been used.2 drivers are incorporated for its configuration.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 14V~18V supply voltage.The gate type on this device is IGBT, N-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.The input type for this program is Inverting.Initially, the configuration is composed of 18 terminations.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 18 pins.Mosfet driver is possible to achieve a maximum output current of 2A.There can be a voltage up to 650V on the high-side (Bootstrap).This device is capable of delivering 2A current.
2ED020I06FIXUMA1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
18 pins
High-side voltage - Max (Bootstrap) of 650V
2ED020I06FIXUMA1 Applications
There are a lot of Infineon Technologies 2ED020I06FIXUMA1 gate drivers applications.
- Portable Media Players
- UPS systems
- Video amplifiers
- Telecom switch mode power supplies
- High current laser/LED systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- PCMCIA applications
- Welding
- Isolated switch mode power supplies (SMPS)
- Digitally controlled power supplies
