2EDL05I06PJXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | EiceDriver™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 850mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Output Current | 500mA |
| Max Supply Current | 600μA |
| Propagation Delay | 600 ns |
| Input Type | Non-Inverting |
| Halogen Free | Halogen Free |
| Rise / Fall Time (Typ) | 48ns 24ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 1.1V 1.7V |
| High Side Voltage - Max (Bootstrap) | 600V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2EDL05I06PJXUMA1 Overview
For greater flexibility, its 14-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is package in Tape & Reel (TR) case.It's mounted on the way to Surface Mount.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as the input type.Its configuration starts with 14 terminations.Mosfet driver is mounted using the Surface Mount method.At the time of design, it is configured with 14 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.Mosfet driver is possible to achieve a maximum output current of 500mA.Several electronic components are included in its subcategory of Peripheral Drivers.A boot strap voltage of 600V is the maximum possible high-side voltage.There are 2 outputs integrated for its basis.Mosfet gate drivers supports a current output of 500mA.850mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Keeping the supply current at 600μA ensures greater stability.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.This gate driver is included into EiceDriver? series.
2EDL05I06PJXUMA1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 850mW
Operating with the supply voltage of EiceDriver?
2EDL05I06PJXUMA1 Applications
There are a lot of Infineon Technologies 2EDL05I06PJXUMA1 gate drivers applications.
- Power factor correction (PFC) circuits
- Motor Controls
- Commercial air-conditioning (CAC)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Supplies for controller area network (CAN),
- Multicolor LED/laser displays
- White Goods - Air Conditioner, Washing Machine,
- Active filtering
- Portable Navigation Devices
