2EDL05N06PJXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | EiceDriver™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 850mW |
| Voltage - Supply | 10V~25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Output Current | 500mA |
| Max Supply Current | 600μA |
| Propagation Delay | 450 ns |
| Input Type | Non-Inverting |
| Halogen Free | Halogen Free |
| Rise / Fall Time (Typ) | 48ns 24ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Logic Voltage - VIL, VIH | 1.1V 1.7V |
| High Side Voltage - Max (Bootstrap) | 600V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2EDL05N06PJXUMA1 Overview
Its 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 10V~25V it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is used as the input type.The configuration starts with 14 terminations.The mount method is Surface Mount.When the device is designed, it has 14 pins.In order to operate, a voltage of 15V has to be applied.In the maximum case, the output current can be 500mA volts.There are several useful electronic components within its subcategory MOSFET Drivers.Max (Bootstrap) can be as high as 600V.Mosfet driver is based on a basis of 2 outputs that have been integrated.Mosfet gate drivers supports a current output of 500mA.Its maximum power dissipation of 850mW shows its power loss capacity without overheating.To ensure high stability, the supply current should be kept at 600μA.Using its power supply of 15V, it provides solutions to diverse power supply problems.The gate driver belongs to the EiceDriver? series.
2EDL05N06PJXUMA1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 850mW
Operating with the supply voltage of EiceDriver?
2EDL05N06PJXUMA1 Applications
There are a lot of Infineon Technologies 2EDL05N06PJXUMA1 gate drivers applications.
- Refrigerator
- RGB applications
- Motor Control
- Uninterruptible Power Supplies (UPS)
- Welding
- Industrial Modules
- High current laser/LED systems
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar power supplies
