2EDL23I06PJXUMA1
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Output Current | 2.3A |
| Max Supply Current | 300mA |
| Propagation Delay | 600 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 420 ns |
| Halogen Free | Halogen Free |
| Rise Time | 48ns |
| Fall Time (Typ) | 37 ns |
| Turn-Off Delay Time | 400 ns |
| Rise / Fall Time (Typ) | 48ns 37ns |
| Interface IC Type | HB BASED PERIPHERAL DRIVER WITH PWM |
| Channel Type | Independent |
| Turn On Time | 0.61 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT |
| Current - Peak Output (Source, Sink) | 2.3A 2.3A |
| Max Junction Temperature (Tj) | 150°C |
| Logic Voltage - VIL, VIH | 1.1V 1.7V |
| Turn Off Time | 0.59 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Ambient Temperature Range High | 105°C |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | EiceDriver™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 900mW |
| Voltage - Supply | 10V~25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
2EDL23I06PJXUMA1 Overview
Its 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A package of Tape & Reel (TR) has been used.In this case, gate drivers is mounted along the way of Surface Mount.By using 10V~25V supply voltage, it is able to demonstrate its superiority.This gate type has a IGBT design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as the input type in this program.Its configuration starts with 14 terminations.The device is mounted using Surface Mount.When the device is designed, it has 14 pins.A supply voltage of 15V is required for operation.The interface IC is referred to as HB BASED PERIPHERAL DRIVER WITH PWM.2.3A is the maximum output current.Several electronic components are included in its subcategory of Peripheral Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current of this device can be set to 2.3A.Based on its maximum power dissipation of 900mW, it is clear that it is capable of transferring and conducting power loss without overheating.Keeping the supply current at 300mA ensures greater stability.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 15V.A gate driver in this series is included in the EiceDriver? series.
2EDL23I06PJXUMA1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 900mW
Operating with the supply voltage of EiceDriver?
2EDL23I06PJXUMA1 Applications
There are a lot of Infineon Technologies 2EDL23I06PJXUMA1 gate drivers applications.
- A/D drivers
- Power factor correction (PFC) circuits
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Power Supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High-speed communications
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- DC/DC converters
- DC-DC Converters
