2EDL23N06PJXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | EiceDriver™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 900mW |
| Voltage - Supply | 10V~17.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Output Current | 2.3A |
| Max Supply Current | 300mA |
| Propagation Delay | 310 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Halogen Free | Halogen Free |
| Rise Time | 48ns |
| Fall Time (Typ) | 37 ns |
| Turn-Off Delay Time | 37 ns |
| Rise / Fall Time (Typ) | 48ns 37ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.8A 2.3A |
| Max Junction Temperature (Tj) | 150°C |
| Logic Voltage - VIL, VIH | 1.1V 1.7V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Ambient Temperature Range High | 105°C |
| Height | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2EDL23N06PJXUMA1 Overview
A higher degree of flexibility is achieved by adopting its 14-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 10V~17.5V, it can demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.Its configuration starts with 14 terminations.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 14 pins.The device is specifically designed to function with a supply voltage of 15V V.As a maximum, there is 2.3A limit to the output current.There are several useful electronic components in this subcategory of MOSFET Drivers.Max (Bootstrap) can be as high as 600V.The basis of this model has 2 outputs integrated.Mosfet driver supports an output current of 2.3A.Its maximum power dissipation of 900mW also demonstrates its maximum ability to transfer power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 300mA.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.This gate driver belongs to the EiceDriver? series.
2EDL23N06PJXUMA1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 900mW
Operating with the supply voltage of EiceDriver?
2EDL23N06PJXUMA1 Applications
There are a lot of Infineon Technologies 2EDL23N06PJXUMA1 gate drivers applications.
- General Purpose 3-Phase Inverter
- Power factor correction (PFC) circuits
- High current laser/LED systems
- Solar power supplies
- DC/DC converters
- Head-up and Head mounted displays
- Portable Media Players
- Isolated Gate Driver Supplies
- Automotive Applications
- Multicolor LED/laser displays
