2SEPC100MZ+TSS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Number of Pins | 9 |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Series | OS-CON™, SEPC |
| Size / Dimension | 0.197Dia 5.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 100μF |
| Voltage - Rated DC | 2.5V |
| Packing Method | Box |
| Lead Pitch | 2mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Lead Spacing | 0.079 2.00mm |
| Lead Diameter | 600 μm |
| Voltage | 2.5V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 500μA |
| Ripple Current | 4.18A |
| Life (Hours) | 5000 hours |
| Ripple Current @ Low Frequency | 209mA @ 120Hz |
| Ripple Current @ High Frequency | 4.18A @ 100kHz |
| Dissipation Factor | 10 % |
| Diameter | 5mm |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 100μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 2SEPC100MZ+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 2SEPC100MZ+TSS is suitable to conduct the ripple current at 4.18A. 2SEPC100MZ+TSS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in 2SEPC100MZ+TSS Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The voltage for the part is specified as 2.5V volts. The dielectric materials are defined as ALUMINUM. There are 9 pins available in the part.
OS-CON™, SEPC Series
Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 2SEPC100MZ+TSS Aluminum Polymer Capacitors.
Typically, 2SEPC100MZ+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Buffering
- Server motherboards
- Power Factor Correction
- Computer motherboards
- DC/DC, DC/AC, and AC/AC converters
- Power Line Buffering
- Audio Crossover
- Bypassing Noise Filtering
- Decoupling Noise Filtering
- Lighting Ballast
