banner_page

2SEPC560M+TSS

OS-CON™, SEPC Series 560μF 2.5V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB)


  • Manufacturer: Panasonic Electronic Components
  • Nocochips NO: 590-2SEPC560M+TSS
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 586
  • Description: OS-CON™, SEPC Series 560μF 2.5V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Number of Pins 6
Dielectric Material ALUMINUM
Operating Temperature -55°C~105°C
Packaging Tape & Box (TB)
Series OS-CON™, SEPC
Size / Dimension 0.197Dia 5.00mm
Tolerance ±20%
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 2
Termination Radial
Type Polymer
Applications General Purpose
Capacitance 560μF
Voltage - Rated DC 2.5V
Packing Method Box
Lead Pitch 2.5mm
ESR (Equivalent Series Resistance) 10mOhm
Polarity POLARIZED
Lead Spacing 0.079 2.00mm
Lead Diameter 450 μm
Voltage 2.5V
Lifetime @ Temp 5000 Hrs @ 105°C
Leakage Current 500μA
Ripple Current 3.9A
Life (Hours) 5000 hours
Ripple Current @ Low Frequency 195mA @ 120Hz
Ripple Current @ High Frequency 3.9A @ 100kHz
Dissipation Factor 12 %
Diameter 6.3mm
Height Seated (Max) 0.354 9.00mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

The capacitance can run at the range of 560μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 2SEPC560M+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 2SEPC560M+TSS is suitable to conduct the ripple current at 3.9A. 2SEPC560M+TSS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in 2SEPC560M+TSS Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The voltage for the part is specified as 2.5V volts. The dielectric materials are defined as ALUMINUM. There are 6 pins available in the part.

OS-CON™, SEPC Series


Capacitance: 560μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of 2SEPC560M+TSS Aluminum Polymer Capacitors.


Typically, 2SEPC560M+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Coupling or blocking
  • DC/DC, DC/AC, and AC/AC converters
  • PFC
  • Spot Welding
  • Signal decoupling & power bypass
  • UPS Buffering
  • Power Factor Correction
  • To enhance power efficiency
  • Frequency Converters
  • Bypassing Noise Filtering

Write a review

Note: HTML is not translated!
    Bad           Good