2SEPC560MX+TSS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Number of Pins | 9 |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Series | OS-CON™, SEPC |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 560μF |
| Voltage - Rated DC | 2.5V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 2.5V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 280μA |
| Ripple Current | 4.7A |
| Life (Hours) | 5000 hours |
| Tan Delta | 0.1 |
| Ripple Current @ Low Frequency | 235mA @ 120Hz |
| Ripple Current @ High Frequency | 4.7A @ 100kHz |
| Dissipation Factor | 10 % |
| Diameter | 8mm |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 560μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 2SEPC560MX+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 2SEPC560MX+TSS is suitable to conduct the ripple current at 4.7A. 2SEPC560MX+TSS Capacitor is mounted by PCB, Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in 2SEPC560MX+TSS Capacitor. There are 280μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 2.5V volts. There are 9 pins available in the part.
OS-CON™, SEPC Series
Capacitance: 560μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 2SEPC560MX+TSS Aluminum Polymer Capacitors.
Typically, 2SEPC560MX+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- PFC
- To reduce power noise & signal noise
- UPS Buffering
- Smoothing Noise Filtering
- DC Buffering
- Signal decoupling & power bypass
- Power Line Buffering
- Audio Crossover
- Voltage Doubling
