Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.5V |
Base Part Number |
03G15 |
Output |
Open Drain or Open Collector |
Pin Count |
5 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
1.3V |
Operating Supply Current |
6μA |
Power Dissipation |
321mW |
Max Supply Current |
6μA |
Adjustable Threshold |
YES |
Quiescent Current |
3μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.4V |
Number of Voltages Monitored |
1 |
Reset Timeout |
5μs Typical Propagation Delay |
Min Reset Threshold Voltage |
1.379V |
Max Reset Threshold Voltage |
1.421V |
Undervoltage Threshold |
1.379V |
Overvoltage Threshold |
1.421V |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
321mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
2T03G15QDCKRG4Q Overview
There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 1.5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 5 pins. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.3V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 6μA, this PMIC is capable of fully function as specified. You can always use 03G15, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 6μA. As the name implies, this supervisor is a kind of the famous Automotive, AEC-Q100 series product line.
2T03G15QDCKRG4Q Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
6μA operating supply current
2T03G15QDCKRG4Q Applications
There are a lot of Texas Instruments 2T03G15QDCKRG4Q Voltage Supervisors applications.
- Power distribution systems of infant care room
- Medical-specific insulation monitor
- Power distribution systems of ICU
- Embedded computing
- Digitally controlled LDO regulators circuit
- Military communications
- Transformer load monitoring equipment
- Kitchen appliances
- Leakage current detection
- emergency room