2T05H33QDCKRG4Q
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | 05H33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 6μA |
| Power Dissipation | 321mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.05V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Threshold Voltage | 3 |
| Undervoltage Threshold | 3.004V |
| Overvoltage Threshold | 3.096V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
2T05H33QDCKRG4Q Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 1.5V supply voltage, the power management conducts. When a supply voltage of 2 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. 5 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.3V volts. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 6μA. If you want to search for similar IC managements of this manufacturer, you can always refer to 05H33, which is the base power ics number. The power management can work with a maximum supply temperature of 6μA. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
2T05H33QDCKRG4Q Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
6μA operating supply current
2T05H33QDCKRG4Q Applications
There are a lot of Texas Instruments 2T05H33QDCKRG4Q Voltage Supervisors applications.
- Set top box
- Smart meter
- Important electronics for automotive safety
- Display equipment
- Solar power charger
- Electronics installed in the vehicle
- Electrical fire monitoring system
- Battery cars
- Power distribution systems of ICU
- DSP
