2U3823-33QDBVRG4Q1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 382333 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.84V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.84V |
| Overvoltage Threshold | 3V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2U3823-33QDBVRG4Q1 Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in the form of a Cut Tape (CT), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. Supply voltage (Vsup) should be at least 1.1V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 25μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to 382333, the base PMIC number. A maximum supply temperature of 25μA can be used. The IC power comes from the well-known Automotive, AEC-Q100 series.
2U3823-33QDBVRG4Q1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
25μA operating supply current
2U3823-33QDBVRG4Q1 Applications
There are a lot of Texas Instruments 2U3823-33QDBVRG4Q1 Voltage Supervisors applications.
- Cloud computing
- Personal computers
- DVR
- Automotive permanent magnet synchronous motors
- DSP
- Efficient information transmission
- Solar power charger
- Rechargeable batteries
- Battery cars
- Stable power system
