2U3836E18QDBVRG4Q1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 3836E18 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 1.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.71V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 1.64V |
| Max Reset Threshold Voltage | 1.76V |
| Threshold Voltage | +1.71V |
| Undervoltage Threshold | 1.64V |
| Overvoltage Threshold | 1.76V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2U3836E18QDBVRG4Q1 Overview
Power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 5 pins in it. This power management system has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.6V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 25μA is the recommended value. You can always use 3836E18, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 25μA. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.
2U3836E18QDBVRG4Q1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
25μA operating supply current
2U3836E18QDBVRG4Q1 Applications
There are a lot of Texas Instruments 2U3836E18QDBVRG4Q1 Voltage Supervisors applications.
- Detection of phase sequence
- Data storage applications
- DSP
- DVR
- Household appliances
- Refrigeration
- Leakage current detection
- Urban rail transit weak current power monitoring
- Functional modules
- Transformer load monitoring equipment
