2U3836J25QDBVRG4Q1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 3836J25 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.25V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.16V |
| Max Reset Threshold Voltage | 2.3V |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.16V |
| Overvoltage Threshold | 2.3V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2U3836J25QDBVRG4Q1 Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.6V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 25μA volt supply current. You can always use 3836J25, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used with this power management. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.
2U3836J25QDBVRG4Q1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
25μA operating supply current
2U3836J25QDBVRG4Q1 Applications
There are a lot of Texas Instruments 2U3836J25QDBVRG4Q1 Voltage Supervisors applications.
- Consumer electronics
- WiFi router
- Electrical fire monitoring system
- Personal computers
- Solar power charger
- Military communications
- Military electronics
- Digitally controlled LDO regulators circuit
- Network equipment
- Electronics installed in the vehicle
