2U3838K33QDBVRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 3838K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.82V |
| Max Reset Threshold Voltage | 3.1V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.82V |
| Overvoltage Threshold | 3.1V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
2U3838K33QDBVRG4Q1 Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1.8V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. Supply voltage (Vsup) should be at least 1.6V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a 25μA supply current present in the power management. You can always use 3838K33, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used with this power management. As you can see, this IC power comes from the well-known Automotive, AEC-Q100 series of products.
2U3838K33QDBVRG4Q1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
25μA operating supply current
2U3838K33QDBVRG4Q1 Applications
There are a lot of Texas Instruments 2U3838K33QDBVRG4Q1 Voltage Supervisors applications.
- Leakage current detection
- Microprocessor system
- Solar power charger
- Military communications
- Automotive permanent magnet synchronous motors
- Insulation fault location system
- Military electronics
- Dash board
- Battery-powered equipment
- Set top box
