4489
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | BRASS |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Insulation Material | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Packaging | Bulk |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | BOARD CONNECTOR |
| Applications | DC Motors, General Purpose |
| Number of Rows | 1 |
| Additional Feature | ROHS COMPIANT |
| Subcategory | Headers and Edge Type Connectors |
| Contact Finish - Mating | AU ON NI |
| Total Number of Contacts | 37 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | compliant |
| Number of Conductors | ONE |
| Reference Standard | UL, CSA |
| Function | Driver |
| Reliability | COMMERCIAL |
| Body Length or Diameter | 3.7 inch |
| Number Of PCB Rows | 1 |
| PCB Contact Pattern | RECTANGULAR |
| Operating Temperature (Max) | 105°C |
| Body Breadth | 0.098 inch |
| Contact Gender | MALE |
| Operating Temperature (Min) | -55°C |
| Body Depth | 0.098 inch |
| Rated Current (Signal) | 3A |
| Contact Style | SQ PIN-SKT |
| Contact Resistance | 20mOhm |
| Insulation Resistance | 5000000000Ohm |
| Mating Contact Pitch | 0.1 inch |
| Body/Shell Style | RECEPTACLE |
| Interface | PWM |
| Termination Type | SOLDER |
| Dielectric Withstanding Voltage | 1000VAC V |
| Output Configuration | Half Bridge (2) |
| Current - Output | 800mA |
| Contact Finish Termination | Gold (Au) - with Nickel (Ni) barrier |
| Contact Pattern | RECTANGULAR |
| Insulator Color | BLACK |
| Voltage - Load | 2.5V~12V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Plating Thickness | FLASH inch |
| Length - Termination | 0.114 inch |
4489 Overview
This package was designed with Bulkin mind.Drivers controllers is packaged wDrivers controllersh a 8-DIP (0.300, 7.62mm) case.In most cases, it is recommended to mount the part at Through Hole.The component connected in DC Motors, General Purposeis compatible with it.There is a motor type Brushed DCassociated with this motor type.Drivers controllers is possible to apply voltage at a rate of 2.5V~12Vto the load.Maintain the current output of the part at 800mA volts.Drivers controllers belongs to the series [0].Controller ic has also been assigned the characteristic [0].You should use this chip at the operating temperature of 105°C.
4489 Features
Applications : DC Motors, General Purpose
Load voltage across the chip 2.5V~12V
Additional Feature: ROHS COMPIANT
4489 Applications
There are a lot of Adafruit Industries LLC 4489 motor drivers applications.
- A cross between entertainment
- Dome
- LED ballasts
- Automotive applications
- Smart lighting applications
- Scanning equipment
- LCD displays
- Daytime running lights (DRLs)
- Commercial office
- Architectural lighting
