476ULG025MFF
| Parameters | |
|---|---|
| Type | Polymer |
| Applications | Decoupling |
| Voltage - Rated | 25V |
| Capacitance | 47μF |
| Reach Compliance Code | unknown |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 45mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 1.94A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 97mA @ 120Hz |
| Ripple Current @ High Frequency | 1.94A @ 100kHz |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2016 |
| Series | ULG |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
The capacitance can run at the range of 47μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to ULG series. This part is mounted in the way of Through Hole. The type of the 476ULG025MFF capacitor can be classified as Polymer. It is suitable for the component connected in Decoupling. This device operates temperature at the range of -55°C~105°C. Illinois Capacitor 476ULG025MFF is suitable to conduct the ripple current at 1.94A. 476ULG025MFF Capacitor is mounted by Through Hole. There are 2 terminals embeded in 476ULG025MFF Capacitor. Voltage - Rated often has values of 25V.
ULG Series
Capacitance: 47μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 476ULG025MFF Aluminum Polymer Capacitors.
Typically, 476ULG025MFF is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- Power Factor Correction
- Motor Start
- Computer motherboards
- DC Link
- UPS Buffering
- Power Line Buffering
- Coupling or blocking
- Motor Control
- DC/DC, DC/AC, and AC/AC converters
