476ULR020MFF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (WET) |
| Packaging | Bulk |
| Tolerance | 20% |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 20V |
| Capacitance | 47μF |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 3.53Ohm |
| Polarity | Polar |
| Ripple Current | 2.1A |
| Life (Hours) | 2000 hours |
| Height Seated (Max) | 8.9916mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 47μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 476ULR020MFF capacitor Illinois Capacitor 476ULR020MFF is suitable to conduct the ripple current at 2.1A. 476ULR020MFF Capacitor is mounted by Through Hole. There are 2 terminals embeded in 476ULR020MFF Capacitor. Voltage - Rated often has values of 20V. The dielectric materials are defined as ALUMINUM (WET). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 47μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of 476ULR020MFF Aluminum Polymer Capacitors.
Typically, 476ULR020MFF is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- Audio Crossover
- DC Buffering
- Motor Control
- Coupling or blocking
- Motor Start
- Frequency Converters
- Flashtube Ignition
- Bypassing Noise Filtering
- UPS Buffering
