477UER016MFH
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (WET) |
| Packaging | Bulk |
| Tolerance | 20% |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 16V |
| Capacitance | 470μF |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 350mOhm |
| Polarity | Polar |
| Ripple Current | 5.4A |
| Life (Hours) | 5000 hours |
| Height Seated (Max) | 13.0048mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 470μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 477UER016MFH capacitor Illinois Capacitor 477UER016MFH is suitable to conduct the ripple current at 5.4A. 477UER016MFH Capacitor is mounted by Through Hole. There are 2 terminals embeded in 477UER016MFH Capacitor. Voltage - Rated often has values of 16V. The dielectric materials are defined as ALUMINUM (WET). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 470μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of 477UER016MFH Aluminum Polymer Capacitors.
Typically, 477UER016MFH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- DC Link
- Coupling or blocking
- Motor Start
- Power Factor Correction
- UPS Buffering
- Audio Crossover
- Decoupling Noise Filtering
- Power Line Buffering
- To reduce power noise & signal noise
