banner_page

4SEP100M+TSS

OS-CON™, SEP Series 100μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB)


  • Manufacturer: Panasonic Electronic Components
  • Nocochips NO: 590-4SEP100M+TSS
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 684
  • Description: OS-CON™, SEP Series 100μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB) (Kg)

Details

Tags

Parameters
Voltage 4V
Lifetime @ Temp 3000 Hrs @ 105°C
Leakage Current 200μA
Ripple Current 1.81A
Life (Hours) 3000 hours
Tan Delta 0.12
Ripple Current @ Low Frequency 90.5mA @ 120Hz
Ripple Current @ High Frequency 1.81A @ 100kHz
Dissipation Factor 12 %
Diameter 6.3mm
Height Seated (Max) 0.236 6.00mm
Length 6mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Terminal Shape WIRE
Operating Temperature -55°C~105°C
Packaging Tape & Box (TB)
Series OS-CON™, SEP
Size / Dimension 0.248Dia 6.30mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Applications General Purpose
Capacitance 100μF
Voltage - Rated DC 4V
Lead Pitch 2.5mm
ESR (Equivalent Series Resistance) 40mOhm
Polarity Polar
Lead Spacing 0.098 2.50mm
Lead Diameter 450 μm

The capacitance can run at the range of 100μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 4SEP100M+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEP100M+TSS is suitable to conduct the ripple current at 1.81A. 4SEP100M+TSS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 4SEP100M+TSS Capacitor. There are 200μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 4V volts.

OS-CON™, SEP Series


Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of 4SEP100M+TSS Aluminum Polymer Capacitors.


Typically, 4SEP100M+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Spot Welding
  • Power Factor Correction
  • Motor Control
  • Frequency Converters
  • PFC
  • Signal decoupling & power bypass
  • Lighting Ballast
  • Computer motherboards
  • Voltage Doubling
  • Audio Crossover

Write a review

Note: HTML is not translated!
    Bad           Good