banner_page

4SEP1200M

OS-CON™, SEP Series 1200μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk


  • Manufacturer: Panasonic Electronic Components
  • Nocochips NO: 590-4SEP1200M
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 531
  • Description: OS-CON™, SEP Series 1200μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Terminal Shape WIRE
Number of Pins 13
Operating Temperature -55°C~105°C
Packaging Bulk
Published 2012
Series OS-CON™, SEP
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Applications General Purpose
Capacitance 1200μF
Voltage - Rated DC 4V
Packing Method TAPE
Lead Pitch 5mm
ESR (Equivalent Series Resistance) 12mOhm
Polarity Polar
Lead Spacing 0.197 5.00mm
Lead Diameter 600 μm
Voltage 4V
Lifetime @ Temp 3000 Hrs @ 105°C
Leakage Current 960μA
Ripple Current 5.44A
Life (Hours) 3000 hours
Tan Delta 0.18
Ripple Current @ Low Frequency 272mA @ 120Hz
Ripple Current @ High Frequency 5.44A @ 100kHz
Dissipation Factor 18 %
Diameter 10mm
Height 13mm
Height Seated (Max) 0.512 13.00mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

The capacitance can run at the range of 1200μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 4SEP1200M capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEP1200M is suitable to conduct the ripple current at 5.44A. 4SEP1200M Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 4SEP1200M Capacitor. There are 960μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by TAPE. The voltage for the part is specified as 4V volts. There are 13 pins available in the part.

OS-CON™, SEP Series


Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of 4SEP1200M Aluminum Polymer Capacitors.


Typically, 4SEP1200M is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Decoupling Noise Filtering
  • Motor Start
  • To enhance power efficiency
  • DC/DC, DC/AC, and AC/AC converters
  • Flashtube Ignition
  • UPS Buffering
  • Motor Control
  • Audio Crossover
  • To reduce power noise & signal noise
  • Power Line Buffering

Write a review

Note: HTML is not translated!
    Bad           Good