4SEP1200M+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| Series | OS-CON™, SEP |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 1200μF |
| Voltage - Rated DC | 4V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 12mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Rated (DC) Voltage (URdc) | 4V |
| Lead Diameter | 600 μm |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 960μA |
| Ripple Current | 5.44A |
| Life (Hours) | 3000 hours |
| Tan Delta | 0.18 |
| Ripple Current @ Low Frequency | 272mA @ 120Hz |
| Ripple Current @ High Frequency | 5.44A @ 100kHz |
| Dissipation Factor | 18 % |
| Height Seated (Max) | 0.512 13.00mm |
| Length | 13mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 1200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 4SEP1200M+T capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEP1200M+T is suitable to conduct the ripple current at 5.44A. 4SEP1200M+T Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 4SEP1200M+T Capacitor. There are 960μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
OS-CON™, SEP Series
Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 4SEP1200M+T Aluminum Polymer Capacitors.
Typically, 4SEP1200M+T is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Motor Control
- Audio Crossover
- UPS Buffering
- Frequency Converters
- Power Factor Correction
- DC/DC, DC/AC, and AC/AC converters
- Power Line Buffering
- DC Buffering
- Coupling or blocking
