4SEP330M+TSS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Series | OS-CON™, SEP |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 330μF |
| Voltage - Rated DC | 4V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 35mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 450 μm |
| Voltage | 4V |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 660μA |
| Ripple Current | 2.56A |
| Life (Hours) | 3000 hours |
| Tan Delta | 0.12 |
| Ripple Current @ Low Frequency | 128mA @ 120Hz |
| Ripple Current @ High Frequency | 2.56A @ 100kHz |
| Dissipation Factor | 12 % |
| Diameter | 8mm |
| Height Seated (Max) | 0.276 7.00mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 4SEP330M+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEP330M+TSS is suitable to conduct the ripple current at 2.56A. 4SEP330M+TSS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 4SEP330M+TSS Capacitor. There are 660μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 4V volts.
OS-CON™, SEP Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 4SEP330M+TSS Aluminum Polymer Capacitors.
Typically, 4SEP330M+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- Bypassing Noise Filtering
- Smoothing Noise Filtering
- Spot Welding
- PFC
- Frequency Converters
- Audio Crossover
- Computer motherboards
- Motor Start
- Decoupling Noise Filtering
