banner_page

4SEP560M+TSS

OS-CON™, SEP Series 560μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB)


  • Manufacturer: Panasonic Electronic Components
  • Nocochips NO: 590-4SEP560M+TSS
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 984
  • Description: OS-CON™, SEP Series 560μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Terminal Shape WIRE
Operating Temperature -55°C~105°C
Packaging Tape & Box (TB)
Series OS-CON™, SEP
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Applications General Purpose
Capacitance 560μF
Voltage - Rated DC 4V
Lead Pitch 3.5mm
ESR (Equivalent Series Resistance) 13mOhm
Polarity POLARIZED
Lead Spacing 0.138 3.50mm
Lead Diameter 600 μm
Voltage 4V
Lifetime @ Temp 3000 Hrs @ 105°C
Leakage Current 448μA
Ripple Current 4.52A
Life (Hours) 3000 hours
Tan Delta 0.15
Ripple Current @ Low Frequency 226mA @ 120Hz
Ripple Current @ High Frequency 4.52A @ 100kHz
Dissipation Factor 15 %
Diameter 8mm
Height Seated (Max) 0.472 12.00mm
Length 12mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

The capacitance can run at the range of 560μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 4SEP560M+TSS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEP560M+TSS is suitable to conduct the ripple current at 4.52A. 4SEP560M+TSS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 4SEP560M+TSS Capacitor. There are 448μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 4V volts.

OS-CON™, SEP Series


Capacitance: 560μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of 4SEP560M+TSS Aluminum Polymer Capacitors.


Typically, 4SEP560M+TSS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Flashtube Ignition
  • PFC
  • DC/DC, DC/AC, and AC/AC converters
  • Smoothing Noise Filtering
  • Voltage Doubling
  • Computer motherboards
  • To enhance power efficiency
  • Power Factor Correction
  • DC Buffering
  • Motor Start

Write a review

Note: HTML is not translated!
    Bad           Good