banner_page

4SEPC680M+TS

OS-CON™, SEPC Series 680μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB)


  • Manufacturer: Panasonic Electronic Components
  • Nocochips NO: 590-4SEPC680M+TS
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 744
  • Description: OS-CON™, SEPC Series 680μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Terminal Shape WIRE
Operating Temperature -55°C~105°C
Packaging Tape & Box (TB)
Series OS-CON™, SEPC
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Applications General Purpose
Capacitance 680μF
Voltage - Rated DC 4V
Lead Pitch 3.5mm
ESR (Equivalent Series Resistance) 7mOhm
Polarity POLARIZED
Lead Spacing 0.138 3.50mm
Lead Diameter 600 μm
Voltage 4V
Lifetime @ Temp 5000 Hrs @ 105°C
Leakage Current 544μA
Ripple Current 6.1A
Life (Hours) 5000 hours
Tan Delta 0.1
Ripple Current @ Low Frequency 305mA @ 120Hz
Ripple Current @ High Frequency 6.1A @ 100kHz
Dissipation Factor 10 %
Diameter 8mm
Height Seated (Max) 0.512 13.00mm
Length 13mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

The capacitance can run at the range of 680μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 4SEPC680M+TS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEPC680M+TS is suitable to conduct the ripple current at 6.1A. 4SEPC680M+TS Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 4SEPC680M+TS Capacitor. There are 544μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 4V volts.

OS-CON™, SEPC Series


Capacitance: 680μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of 4SEPC680M+TS Aluminum Polymer Capacitors.


Typically, 4SEPC680M+TS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Motor Start
  • Frequency Converters
  • To reduce power noise & signal noise
  • Power Factor Correction
  • PFC
  • DC/DC, DC/AC, and AC/AC converters
  • Audio Crossover
  • Motor Control
  • DC Buffering
  • To enhance power efficiency

Write a review

Note: HTML is not translated!
    Bad           Good