Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Cut Tape (CT) |
Series |
OS-CON™, SEPC |
Size / Dimension |
0.394Dia 10.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Termination |
Radial |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
4V |
Capacitance |
820μF |
Voltage - Rated DC |
4V |
Lead Pitch |
5mm |
ESR (Equivalent Series Resistance) |
7mOhm |
Polarity |
Polar |
Lead Spacing |
0.197 5.00mm |
Lead Diameter |
600 μm |
Voltage |
4V |
Lifetime @ Temp |
5000 Hrs @ 105°C |
Leakage Current |
656μA |
Ripple Current |
6.64A |
Life (Hours) |
5000 hours |
Ripple Current @ Low Frequency |
305mA @ 120Hz |
Ripple Current @ High Frequency |
6.1A @ 100kHz |
Dissipation Factor |
10 % |
Diameter |
10mm |
Height Seated (Max) |
0.512 13.00mm |
Length |
13mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 4SEPC820M+T capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEPC820M+T is suitable to conduct the ripple current at 6.64A. 4SEPC820M+T Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. 4SEPC820M+T Capacitor. There are 656μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. Voltage - Rated often has values of 4V. The voltage for the part is specified as 4V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
OS-CON™, SEPC Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 4SEPC820M+T Aluminum Polymer Capacitors.
Typically, 4SEPC820M+T is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- Voltage Doubling
- Coupling or blocking
- DC Buffering
- Spot Welding
- Computer motherboards
- To enhance power efficiency
- Lighting Ballast
- DC/DC, DC/AC, and AC/AC converters
- Smoothing Noise Filtering