50PFV100M10X10.5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Surface Mount Land Size | 0.406Lx0.406W 10.30mmx10.30mm |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | PFV |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Type | Hybrid |
| Applications | Automotive |
| Voltage - Rated | 50V |
| Capacitance | 100μF |
| ESR (Equivalent Series Resistance) | 28mOhm |
| Polarity | Polar |
| Lifetime @ Temp | 4000 Hrs @ 125°C |
| Ripple Current | 80mA |
| Life (Hours) | 4000 hours |
| Ripple Current @ Low Frequency | 80mA @ 120Hz |
| Ripple Current @ High Frequency | 1.6A @ 100kHz |
| Height Seated (Max) | 0.413 10.50mm |
| RoHS Status | ROHS3 Compliant |
| Ratings | AEC-Q200 |
The capacitance can run at the range of 100μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PFV series. This part is mounted in the way of Surface Mount. The type of the 50PFV100M10X10.5 capacitor can be classified as Hybrid. It is suitable for the component connected in Automotive. This device operates temperature at the range of -55°C~125°C. Rubycon 50PFV100M10X10.5 is suitable to conduct the ripple current at 80mA. 50PFV100M10X10.5 Capacitor is mounted by Surface Mount. There are 2 terminals embeded in 50PFV100M10X10.5 Capacitor. Voltage - Rated often has values of 50V. The dielectric materials are defined as ALUMINUM (SOLID POLYMER).
PFV Series
Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of 50PFV100M10X10.5 Aluminum Polymer Capacitors.
Typically, 50PFV100M10X10.5 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To enhance power efficiency
- Server motherboards
- PFC
- To reduce power noise & signal noise
- Power Factor Correction
- Motor Control
- Voltage Doubling
- Decoupling Noise Filtering
- Smoothing Noise Filtering
- Audio Crossover
