54FCT162244CTEB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | MAX OUTPUT SKEW = 0.5NS; TYP VOLP < 0.6V @ VCC = 5V, TA = 25 DEGREE C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Quiescent Current | 5μA |
| Family | FCT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.016 A |
| Number of Bits per Element | 4 |
| Screening Level | MIL-STD-883 Class B |
| High Level Output Current | 16mA |
| Low Level Output Current | 16mA |
| Control Type | ENABLE LOW |
| Height | 2.4mm |
| Length | 16.3mm |
| Width | 9.65mm |
| Thickness | 2.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT162244CTEB Overview
48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the FCT family of parts. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 5μA. It is recommended to use a 5V power supply. Logical driver features MAX OUTPUT SKEW = 0.5NS; TYP VOLP < 0.6V @ VCC = 5V, TA = 25 DEGREE C to better serve the need. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 16mA to its low level. In high level output mode, the electronic parts may conduct 16mA of current. It is known as a BUS DRIVER logic IC.
54FCT162244CTEB Features
Bus Driver/Transceivers
MAX OUTPUT SKEW = 0.5NS; TYP VOLP < 0.6V @ VCC = 5V, TA = 25 DEGREE C
High Level Output: 16mA
Low Level Output: 16mA
BUS DRIVER Logic IC
54FCT162244CTEB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT162244CTEB Buffers & Transceivers applications.
- Wireless teaching
- TV signal transmission
- IP cameras
- Fast Ethernet
- Switches/bridges/routers/servers
- Optical sub-assembly (OSA)
- Fiber optic cable connection network
- Vehicle, ship, aircraft navigation and positioning
- interconnection between computers
- Thermal management
