Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Number of Pins |
48 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
WITH DIRECTION CONTROL |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
FLAT |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Number of Channels |
16 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Ports |
2 |
Propagation Delay |
6.5 ns |
Quiescent Current |
5μA |
Family |
FCT |
Logic Function |
Inverting, Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
Number of Bits per Element |
8 |
Prop. Delay@Nom-Sup |
4.9 ns |
High Level Output Current |
16mA |
Low Level Output Current |
16mA |
Control Type |
COMMON CONTROL |
Translation |
N/A |
Length |
16.3mm |
Width |
9.65mm |
Thickness |
2.4mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
54FCT162245ATEB Overview
All of the 2 elements are put into use. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. FCT family part. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 5μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features WITH DIRECTION CONTROL to better serve the need. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 16mA to its low level. In high level output mode, the electronic parts may conduct 16mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS TRANSCEIVER logic IC.
54FCT162245ATEB Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
High Level Output: 16mA
Low Level Output: 16mA
BUS TRANSCEIVER Logic IC
54FCT162245ATEB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT162245ATEB Buffers & Transceivers applications.
- VoIP phones
- Shortwave receiver
- Televisions
- Interconnection between switches and computers
- Satellite ground stations
- Wireless teaching
- Cable network front end
- Fiber optic cable connection network
- SONET/SDH Network
- Satellite communication