54FCT16244ATEB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | POWER OFF DISABLE O/PS; TYP VOLP < 1V @ VCC = 5V, TA = 25 DEGREE C; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Quiescent Current | 500μA |
| Family | FCT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 5.1 ns |
| Screening Level | MIL-STD-883 Class B |
| High Level Output Current | 48mA |
| Propagation Delay (tpd) | 5.1 ns |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Length | 16.3mm |
| Width | 9.65mm |
| Thickness | 2.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT16244ATEB Overview
48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a FCT family part that is attached to this electronic component. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 500μA. It is recommended to use a 5V power supply. Logical driver features POWER OFF DISABLE O/PS; TYP VOLP < 1V @ VCC = 5V, TA = 25 DEGREE C; MAX OUTPUT SKEW = 0.5NS to better serve the need. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct 48mA of current. It is known as a BUS DRIVER logic IC.
54FCT16244ATEB Features
Bus Driver/Transceivers
POWER OFF DISABLE O/PS; TYP VOLP < 1V @ VCC = 5V, TA = 25 DEGREE C; MAX OUTPUT SKEW = 0.5NS
High Level Output: 24mA
Low Level Output: 48mA
BUS DRIVER Logic IC
54FCT16244ATEB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT16244ATEB Buffers & Transceivers applications.
- Carrier phase observations
- Wireless smart house
- Televisions
- 1x/2x Fiber Channel
- transmission relay
- Lamps
- Wireless security systems
- Fiber-to-the-desktop
- Wired telephone
- Copper and fiber optic cables connection network
