Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Through Hole |
Package / Case |
CDIP |
Number of Pins |
20 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn63Pb37) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
POWER OFF DISABLE OUTPUTS |
Packing Method |
TUBE |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.8 ns |
Turn On Delay Time |
9.8 ns |
Family |
FCT |
Logic Function |
Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.032 A |
High Level Output Current |
-12mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Length |
25.4mm |
Width |
7.62mm |
Thickness |
2.9mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
54FCT373ATDB Overview
The CDIP package contains it. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. It operates with a supply voltage of 5V. It is equipped with 20 pin count. It is part of the family of electronic devices called FCT. In addition, it is designed with a pin number of 20. It is mounted according to the Through Hole method. This device is equipped with 2 ports. A total of 5V power supplies are needed to run it. Considering the reliability of this device, it would be a good candidate for TUBE. A high efficiency supply voltage should be maintained at 5V. It is also characterized by POWER OFF DISABLE OUTPUTS. It is set to zero for the low level output current. There is -12mA high level output current set. It is recommended to work at a temperature lower than 125°C. Temperatures above -55°C should be used. There is a maximum voltage of 5.5V supported. The minimal voltage for operation is 4.5V. There is a logic IC that it uses that is a BUS DRIVER.
54FCT373ATDB Features
CDIP package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT373ATDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT373ATDB Latches applications.
- Decade counting 7-segment decimal display
- Relay replacement
- Network Switches
- Frequency dividing
- Counting
- Hammer Device Information
- Multi-line decoders
- Counter control
- Shift left with parallel loading
- Parallel Input