54FCT373ATLB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | POWER OFF DISABLE OUTPUTS |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.8 ns |
| Turn On Delay Time | 9.8 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.54mm |
| Length | 8.9mm |
| Width | 8.9mm |
| Thickness | 1.52mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT373ATLB Overview
In the LCC package, it can be found as an embedded module. The design of this electronic part contains 8 bits. This device has 20 terminations. With a supply voltage of 5V, it operates. It is equipped with 20 pin count. It is a member of the FCT family of electronic devices. The 20 pins are designed into it. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. A total of 5V power supplies are needed to run it. Based on its reliable performance, this device is well suited to TUBE. A high efficiency supply voltage should be maintained at 5V. There are also characteristics of POWER OFF DISABLE OUTPUTS associated with it. There is 32mA low level output current set. -12mA is the high level output current. It is recommended to work at a temperature lower than 125°C. The operating temperature should be higher than -55°C. The maximum supply voltage is 5.5V. The minimal voltage for operation is 4.5V. A BUS DRIVER logic IC is used.
54FCT373ATLB Features
LCC package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT373ATLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT373ATLB Latches applications.
- Shift right with parallel loading
- Buffer/Storage Registers
- Relay replacement
- Synchronous frequency dividers
- Pattern generators
- Parallel Output
- Ring counter
- Clocks
- Automotive HEV/EV Powertrain
- Network Switches
