54FCT373CTDB
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 8 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | POWER OFF DISABLE OUTPUTS |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
54FCT373CTDB Overview
It is embedded in the CDIP package. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. In order to function, the supply voltage should be set to 5V. It is equipped with 20 pin count. This electronic device belongs to the family of FCT. Designed with 20 pins, it is compatible with a wide range of devices. Through Hole is the method used for mounting this electronic part. 2 ports are available on this device. The system is powered by 5V sources. The device's reliable performance makes it a good choice for TUBE. The supply voltage should be maintained at 5V for high efficiency. In addition to that, it is also characterized by POWER OFF DISABLE OUTPUTS. It has been set to 32mA for the low level output current. The high level output current is set to -12mA. It is recommended to work at a temperature lower than 125°C. Temperatures above -55°C should be used. It supports the maximal supply voltage of 5.5V. This device requires a minimum voltage of 4.5V. As far as the logic IC is concerned, it uses BUS DRIVER.
54FCT373CTDB Features
CDIP package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT373CTDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT373CTDB Latches applications.
- Sample and hold register
- Ring counter
- Four-bit storage with output enable
- Pattern generators
- Timers
- General-Purpose Register
- Buffer/Storage Registers
- Programmable binary
- Relay
- Frequency dividing
