Parameters |
Number of Pins |
20 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
POWER OFF DISABLE OUTPUTS |
Packing Method |
TUBE |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
8 ns |
Turn On Delay Time |
8 ns |
Family |
FCT |
Logic Function |
Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.032 A |
High Level Output Current |
-12mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Height Seated (Max) |
2.54mm |
Length |
8.9mm |
Width |
8.9mm |
Thickness |
1.52mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
LCC |
54FCT373CTLB Overview
A package called LCC contains it. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. It is a member of the FCT family of electronic devices. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. The system is powered by 5V sources. Considering the reliability of this device, it would be a good candidate for TUBE. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It is also characterized by POWER OFF DISABLE OUTPUTS. 32mA is set as the low level output current. -12mA represents the high level output current. It is recommended to work at a temperature lower than 125°C. A temperature greater than -55°C should be used as the operating temperature. It supports a maximum supply voltage of 5.5V. The minimal supply voltage is 4.5V. A logic IC that is used in this application is BUS DRIVER.
54FCT373CTLB Features
LCC package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT373CTLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT373CTLB Latches applications.
- Pseudo-random code generators
- Avionics
- Display driver
- Buffer/Storage Registers
- Stacked or Push-Down Registers
- Up-Down Johnson
- Parallel data storage
- Phase comparator
- PCs and Notebooks
- Ring counter