54FCT373TLB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | POWER OFF DISABLE OUTPUTS |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.54mm |
| Length | 8.9mm |
| Width | 8.9mm |
| Thickness | 1.52mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT373TLB Overview
The LCC package contains it. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With a supply voltage of 5V, it operates. There are 20 pins attached to it. It is a member of the FCT family of electronic devices. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. In this device, there are 2 ports. 5V power supplies are needed to operate it. Considering the reliability of this device, it would be a good candidate for TUBE. A high efficiency supply voltage should be maintained at 5V. In addition, POWER OFF DISABLE OUTPUTS characterize it. The low level output current is set to 32mA. It is set to zero for the high level output current. It is recommended to work at a temperature lower than 125°C. Temperatures above -55°C should be used. It supports the maximal supply voltage of 5.5V. The minimal supply voltage is 4.5V. As for the logic IC it uses, it is a BUS DRIVER.
54FCT373TLB Features
LCC package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT373TLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT373TLB Latches applications.
- Pattern generators
- Shift right register
- Automotive Infotainment
- Counter control
- Registers
- Ring counter
- Shift left register
- Parallel data storage
- Frequency dividing
- Buffer Storage
