54FCT374ATDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.2 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT374ATDB Overview
In the form of CDIP, it has been packaged. It has been determined that there have been 20 terminations. Power is supplied from a voltage of 5V volts. Devices in the FCTfamily are electronic devices. In this case, the electronic component is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. It is designed with 8bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. There are 5V power supplies attached to it. This D flip flop is equipped with 0 ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. 10μAquiescent current consumed. It is set to -12mAfor the high level output current. There is 32mA output current at the low level. The operating temperature should be lower than 125°C. It should be higher than -55°Cwhen the system is operating. The system operates with a minimum supply voltage of 4.5V. It supports a maximum supply voltage of 5.5V volts. It uses the logic IC BUS DRIVER. The T flip flop is equipped with 1functions . With 20 pins, it is equipped with a low power consumption.
54FCT374ATDB Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
54FCT374ATDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT374ATDB Flip Flops applications.
- Single Down Count-Control Line
- Counters
- Control circuits
- Registers
- Count Modes
- Convert a momentary switch to a toggle switch
- Consumer
- QML qualified product
- Storage registers
- Frequency Divider circuits
