54FCT374CTDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.2 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.9mm |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT374CTDB Overview
CDIPis the way it is packaged. Currently, there are 20 terminations. A voltage of 5V is used to power it. It belongs to the family of electronic devices known as FCT. It is mounted by the way of Through Hole. Basically, it is designed with a set of 20 pins. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. There are 8bits in its design. A reliable performance of this D flip flop makes it well suited for use in TUBE. There are 5V power supplies attached to it. The flip flop has 2embedded ports. Optimal efficiency requires a supply voltage of 5V. It consumes a total of 10μA quiescent current at any given time. It is set to -12mAfor the high level output current. In the low level output current setting, 32mAis used. There should be a temperature below 125°Cduring operation. If the operating temperature is higher than -55°C, the system should operate properly. The minimal supply voltage is 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. It uses the logic IC BUS DRIVER. A total of 1 functions are provided by this T flip flop. It has 20 pins.
54FCT374CTDB Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
54FCT374CTDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT374CTDB Flip Flops applications.
- Computing
- Instrumentation
- Power down protection
- Guaranteed simultaneous switching noise level
- Memory
- Single Up Count-Control Line
- Supports Live Insertion
- High Performance Logic for test systems
- Modulo – n – counter
- Digital electronics systems
