54FCT573ATDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.8 ns |
| Turn On Delay Time | 9.8 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| Prop. Delay@Nom-Sup | 5.6 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT573ATDB Overview
There is an embedded version of it in package CDIP. The design of this electronic part is based on 8 bits. A device such as this has 20 terminations designed. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. FCT is the family name of this electronic device. In addition, it is designed with a pin number of 20. A Through Hole mounting method has been used for this electronic part. In this device, there are 2 ports. There are 5V power supplies required for this machine to operate. A high level of efficiency is achieved by maintaining the supply voltage at 5V. BROADSIDE VERSION OF 373 are other characteristics of it. In the low level output current, the value is set to 32mA. There is -12mA output current at the high level. Ideally, the operating temperature should be lower than 125°C. A temperature greater than -55°C should be used for operation. There is a maximum voltage of 5.5V supported. In order for the machine to operate, the supply voltage must be 4.5V. There is a logic IC BUS DRIVER used in the system.
54FCT573ATDB Features
CDIP package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT573ATDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT573ATDB Latches applications.
- Display
- Hammer
- Shift right with parallel loading
- Frequency
- Parallel data synchronization
- Pattern generators
- Automotive HEV/EV Powertrain
- Parallel Output
- Relay
- Phase comparator
