54FCT573CTDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 8 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT573CTDB Overview
The CDIP package contains it. The electronic part in this image has 8 bits. This device has 20 terminations. In order to function, the supply voltage should be set to 5V. There are 20 pins on it. FCT is the family name of this electronic device. With the design of the board, there are only 20 pins. A Through Hole mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A total of 5V power supplies are required for it to operate. In order to achieve high efficiency, the supply voltage should be kept at 5V. In addition, BROADSIDE VERSION OF 373 characterize it. There is 32mA output current at the low level. -12mA is the high level output current. Lower than 125°C is the ideal operating temperature. Temperatures higher than -55°C should be used for operation. It supports a maximum supply voltage of 5.5V. With a voltage of 4.5V, it operates at its minimum capacity. It uses the logic IC BUS DRIVER.
54FCT573CTDB Features
CDIP package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT573CTDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT573CTDB Latches applications.
- Pattern Generators
- Hammer
- Pseudo-random code generators
- Parallel data synchronization
- Shift right register
- PCs and Notebooks
- Serial Input
- Buffer register
- Instrumentation
- Communication systems
