54FCT573CTLB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 8 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.54mm |
| Length | 8.9mm |
| Width | 8.9mm |
| Thickness | 1.52mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT573CTLB Overview
The package in which it is embedded is named LCC. An electronic part with 8 bits is designed. This device is designed with 20 terminations. A 5V voltage supply is required for operation. There are 20 pins attached to it. This electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. There are 5V power supplies required for this machine to operate. The supply voltage should be maintained at 5V for high efficiency. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. It is set to zero for the low level output current. -12mA is the high level output current. Ideally, the operating temperature should be lower than 125°C. There should be a temperature above -55°C at which the device operates. There is a maximum voltage supply of 5.5V that can be applied to it. With a voltage of 4.5V, it operates at its minimum capacity. The logic IC it adopts is BUS DRIVER.
54FCT573CTLB Features
LCC package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT573CTLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT573CTLB Latches applications.
- Serial Input
- BCD counting
- Audio and video switching
- Hammer
- Motor Drives
- TV Set-top Boxes
- A/D converters
- Control circuits
- Ring counter
- Counter
