54FCT573TDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT573TDB Overview
In the CDIP package, it is embedded. It is designed with 8 bits. A device with this design has 20 terminations. In order to operate it, the supply voltage must be 5V. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of FCT. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Through Hole. 2 ports are available on this device. The system is powered by 5V sources. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It is also characterized by BROADSIDE VERSION OF 373. There is 32mA output current at the low level. In the high level output current, the value is set to -12mA. Lower than 125°C is the recommended operating temperature. A temperature greater than -55°C should be used for operation. 5.5V is the maximum voltage it supports. This device requires a minimum voltage of 4.5V. It uses the logic IC BUS DRIVER.
54FCT573TDB Features
CDIP package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT573TDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT573TDB Latches applications.
- Double bus register system
- Up-Down Johnson
- Four-bit storage with output enable
- Buffer Storage
- Clocks
- Timers
- Parallel Output
- Motor Drives
- Watches
- Automotive Infotainment
